Support Type: Vantage Pro2
Stand-Alone Rain Collector (Vantage Pro2 Base) User Guide (6466, 6466M)
Rain Collector with Vantage Pro2 Base User Manual (6465)
Replacement Rain Cone Kit Instruction Sheet (6462)
Instructions for how to install your new AeroCone rain collector.
Vantage Pro2 GroWeather User Manual (6820)
This user manual for the Vantage Pro2 GroWeather sensor suite includes details about setting up and using the system. This Sensor Suite collects outside weather data and sends the data to a receiver such as a Vantage Pro2 console. The wireless sensor suite can also transmit data to wireless Vantage Connect, Vantage Vue console, Envoy8X, or wireless Weather Envoy. The wireless sensor suite is solar-powered and sends data via radio. The cabled sensor suite sends data via cable to one cabled Vantage Pro2 console, cabled Weather Envoy, or cabled Vantage Connect and receives power via the console, Envoy or Vantage Connect cable.
Addendum to Vantage Pro2 ISS User Manual in French, German, Spanish
Updated information for use with Vantage Pro2 ISS User Manual in French, Dutch, Spanish (7394.241).
Fan Motor Replacement Kit Installation Instructions (7758 or 7758B), for Vantage Pro2
For Fan-Aspirated Integrated Sensor Suites (ISS):
Product number 7758B is a replacement fan motor assembly for the following products:
- Vantage Pro2 with 24-Hour Fan-Aspirated Radiation Shield
- Vantage Pro2 Plus with 24-Hour Fan-Aspirated Radiation Shield
Product number 7758 is a replacement fan motor assembly for the following products:
- Vantage Pro2 Solar/Ag ISS
- Any ISS to which a Daytime Fan-Aspirated Radiation Shield has been added
Temperature/Humidity Sensor Instruction Manual (6830)
Instructions for setting up a Temperature/Humidity Sensor. The Temperature/Humidity Sensor consists of temperature and humidity sensors located in a radiation shield, with a 25′(7.6 m) sensor cable.
Temperature/Humidity Sensor with 24-Hour Solar-Powered Fan-Aspirated Radiation Shield Instruction Manual (6832)
The Temperature/Humidity Sensor consists of temperature and humidity sensors with a 25′ sensor cable. The temperature and humidity sensors are mounted in a 24-Hour Fan-Aspirated Radiation Shield to minimize the impact of solar radiation on sensor readings.