Check the set up on your Vantage Pro2 display. Push and hold the "Done" button. While you are holding the "Done" button push the "-" button. If your screen says “Receiving From” you are now in the set up mode. Now quickly push and release the "Done" button.
You are now in the 2nd set up screen: It should read "ON (ISS) 1" If it reads "ON (ISS ) 1 Repeater A," you will not get any outside readings (unless you in fact do not have a repeater).Push and release the "Wind" Button several times. Every time you push and release the "Wind" button the Repeater reading will cycle until it disappears. That is what you want.
You want the screen to read "ON (ISS) 1."When you see "ON (ISS) 1", push and hold the "Done" button for a number of seconds until the screen goes back to the current reading screen.